Volvo Keychain Collection – models after 2000 year
A unique 3D-printed keychain collection inspired by the full range of Volvo passenger cars produced since the year 2000. Perfect for fans of Swedish automotive design – from classic sedans and wagons to modern SUVs and next-generation…
Files are hosted by the publisher — 3DX does not serve them directly. The link opens the model page in a new tab.
About this model
A unique 3D-printed keychain collection inspired by the full range of Volvo passenger cars produced since the year 2000. Perfect for fans of Swedish automotive design – from classic sedans and wagons to modern SUVs and next-generation electric vehicles.
Included Models:
S60, V70, XC70, S40, V50, XC90, C30, C70, XC60, V60, V40, S90, V90, XC40, EX40, C40, EX30, EX90, EM90, ES90
Common Features:
- Compact size – easily attaches to your keyring, bag, or lanyard.
- Two-layer construction:
- Top layer – raised white model number (e.g., “XC90”) in bold, high-contrast typography.
- Base layer – matte black PLA background.
- Mounting hole – integrated in the lower section for quick keyring or carabiner attachment.
- Material & finish – lightweight and durable filament (PLA), wear-resistant, with crisp edges and clean detailing.
3D Printing Instructions:
- No AMS required.
- Color change (for the white text) occurs at layer 20.
- Recommended material: PLA
- No supports or raft needed; use active cooling for best results.
Print settings
These are the settings the model was actually printed and tested with — the profile in the 3MF is already set up this way, so you can send it straight to the printer.
- Nozzle: 0.4 mm
- Filament: ~171 g
Files
The model is free on MakerWorld and ships as a ready-to-print 3MF with the print profile inside — no slicer setup needed. Hit the download button above; the file is hosted there, not on 3DX.
Frequently asked questions
Can I print these keychains without an AMS unit?
Yes, no AMS is required. The white text on the top layer is achieved by a single manual filament color change at layer 20 in your slicer, so any single-extruder printer can handle it.
What is the total filament cost for one keychain?
Each keychain uses approximately 171 grams of PLA. At typical PLA prices of $15–$25 per kilogram, the material cost per keychain is roughly $2.50 to $4.30, making it a very inexpensive print.
Do I need to add supports or a raft to print these models?
No supports or raft are needed. The model is designed to print directly on the build plate with no overhangs, and active cooling is recommended to keep the lettering crisp.
