Keychain I Love Cats
A playful and charming accessory for cat enthusiasts, this 3D‑designed keychain combines a minimalist silhouette with bold, layered accents for a delightful everyday reminder of your feline fondness. Features: Dimensions: Compact (approx.…
Files are hosted by the publisher — 3DX does not serve them directly. The link opens the model page in a new tab.
About this model
A playful and charming accessory for cat enthusiasts, this 3D‑designed keychain combines a minimalist silhouette with bold, layered accents for a delightful everyday reminder of your feline fondness.
Features:
- Dimensions: Compact (approx. 6 × 4 cm) and lightweight—perfect for your keyring without weighing it down.
- Shape: Clean, stylized profile of a sitting cat, complete with a gently curved tail for visual balance.
- Layers:
- Base: Smooth, perfectly flat white background forming the cat’s body.
- Facial Details: Two raised black circles for eyes and a small black nose, giving the cat a friendly expression.
- Text: Raised “I” above “CATS” in deep black, centered on the torso.
- Heart: Vibrant red heart in place of the word “love,” protruding slightly for a punchy pop of color.
- Mounting Hole: Discreetly integrated at the top of the head—slot your split ring or carabiner through it in seconds.
Print settings
These are the settings the model was actually printed and tested with — the profile in the 3MF is already set up this way, so you can send it straight to the printer.
- Layer height: 0.2 mm
- Nozzle: 0.4 mm
- Walls: 2
- Infill: 15 %
- Filament: ~10 g
Files
The model is free on MakerWorld and ships as a ready-to-print 3MF with the print profile inside — no slicer setup needed. Hit the download button above; the file is hosted there, not on 3DX.
Frequently asked questions
How much filament does this keychain actually use, and is that a full spool or just a tiny piece?
The entire keychain uses approximately 10 grams of filament, which is about the weight of two US quarters. You will not come close to finishing a standard 1 kg spool—this model is an excellent way to use up leftover material from other prints.
Can I print this with a single-color printer, or do I need a multi-material system for the black and red details?
The article specifies a 0.4 mm nozzle and 0.2 mm layer height, but the model uses raised black and red details on a white base, which requires either a printer with filament swapping (MMU/AMS) or a manual filament change at the correct layer height in your slicer. A single-color printer without pausing will print the entire model in one color.
Is the mounting hole big enough for a standard keyring or split ring?
Yes, the hole is discretely integrated at the top of the cat’s head and is designed to accept a standard split ring or small carabiner. No scaling or post-processing is needed—the hole is already modeled into the 3MF file.
