Keychain I Love Dogs
A playful and eye‑catching accessory for every dog lover—this keychain combines a friendly canine silhouette with the classic “I ❤️ DOGS” message in a layered, three‑dimensional design that’s as fun as it is functional. Features:…
Files are hosted by the publisher — 3DX does not serve them directly. The link opens the model page in a new tab.
About this model
A playful and eye‑catching accessory for every dog lover—this keychain combines a friendly canine silhouette with the classic “I ❤️ DOGS” message in a layered, three‑dimensional design that’s as fun as it is functional.
Features:
- Dimensions: Compact (~5 × 4,7 cm) and lightweight—perfect for everyday carry on your keyring.
- Shape: Distinct dog profile with gently rounded edges, conveying warmth and charm.
- Layers:
- Base: Smooth, even white silhouette forming the dog’s body.
- Text: Raised black letters “I” and “DOGS” integrated into the torso, offering clear contrast.
- Heart: Vibrant red, slightly protruding heart nestled between “I” and “DOGS” for a bold focal point.
- Attachment: Built‑in circular hole at the top of the head enables quick clipping onto a split ring or carabiner.
With its simple yet striking form and tactile depth, this keychain is a must‑have gift or personal treat for anyone who truly loves dogs.
Print settings
These are the settings the model was actually printed and tested with — the profile in the 3MF is already set up this way, so you can send it straight to the printer.
- Layer height: 0.2 mm
- Nozzle: 0.4 mm
- Walls: 2
- Infill: 15 %
- Filament: ~8 g
Files
The model is free on MakerWorld and ships as a ready-to-print 3MF with the print profile inside — no slicer setup needed. Hit the download button above; the file is hosted there, not on 3DX.
Frequently asked questions
Do I need to do a filament change during the print to get the black and red colors?
Yes. The model uses three colors (white base, black text, red heart) in separate layers, so a standard single-extruder printer will require two manual or automatic filament changes at the specific layer heights where the text and heart begin. The 3MF profile may include pause commands for this—check your slicer preview before printing.
Will this keychain fit a standard keyring or a carabiner?
Yes. The built-in circular hole at the top of the dog’s head is designed to clip onto a split ring or a small carabiner. The compact dimensions (roughly 5 x 4.7 cm) and light weight of about 8 grams of filament mean it won’t weigh down your keys.
Can I print this with a 0.2 mm nozzle instead of the recommended 0.4 mm?
You can, but the layer height and wall settings in the article (0.2 mm layer height, 2 walls) were tested with a 0.4 mm nozzle. A 0.2 mm nozzle will produce finer detail on the raised text and heart, but will roughly double the print time and may require adjusting extrusion width and retraction settings to avoid clogging.
