Peugeot Keychain Pack 108,208,308,408,508,2008-etc
The “Peugeot 8 Series” keychain collection is a complete set of accessories dedicated to all Peugeot models ending in the digit 8. Perfect for automotive enthusiasts who want to carry their favorite model with them—ranging from the compact…
Files are hosted by the publisher — 3DX does not serve them directly. The link opens the model page in a new tab.
About this model
The “Peugeot 8 Series” keychain collection is a complete set of accessories dedicated to all Peugeot models ending in the digit 8. Perfect for automotive enthusiasts who want to carry their favorite model with them—ranging from the compact 108, through hatchbacks 208 and 308 and sedans 408 and 508, to the city-friendly SUV 2008, crossover 3008, and family-sized 5008.
Models Included:
- 108
- 208
- 308
- 408
- 508
- 2008
- 3008
- 5008
Common Features:
- Compact size – easily attaches to your keyring, lanyard, or bag.
- Two-layer construction:
- Top layer – raised white model number (e.g., “308”) in bold typography.
- Base layer – matte black PLA background
- Attachment hole – small built-in loop in the lower corner for a keyring or carabiner.
- Material & Finish – lightweight, durable plastic resistant to wear; precise edge detailing and engraving.
Carry the spirit of your favorite Peugeot 8-series model wherever you go!
Print settings
These are the settings the model was actually printed and tested with — the profile in the 3MF is already set up this way, so you can send it straight to the printer.
- Layer height: 0.2 mm
- Nozzle: 0.4 mm
- Walls: 2
- Infill: 15 %
- Filament: ~35 g
Files
The model is free on MakerWorld and ships as a ready-to-print 3MF with the print profile inside — no slicer setup needed. Hit the download button above; the file is hosted there, not on 3DX.
Frequently asked questions
Do I need to do a filament swap or use an AMS to print the two-layer black-and-white design?
Yes, because the model has a raised white top layer (the model number) on a matte black PLA base layer. The ready-to-print 3MF profile on MakerWorld includes the correct pause or filament-change commands for a 0.4 mm nozzle, so a single extruder with manual swap or an AMS/MMU will work.
Can I print this with a 0.6 mm or 0.8 mm nozzle instead of the recommended 0.4 mm?
You can, but the raised lettering and the attachment hole will lose detail and may become less readable or harder to open. The profile was tested at 0.4 mm and 0.2 mm layer height, so sticking with those settings gives the cleanest result for the small text and keyring loop.
What if my Peugeot model isn’t listed — can I add a custom number?
The article only provides files for the eight models shown (108, 208, 308, 408, 508, 2008, 3008, 5008). To print a different number you would need to edit the 3MF in a CAD program or contact the original publisher; the free download does not include a blank or editable template.
