Oil Service Tag–Reminder for Your Next Oil Change
Keep your car maintenance organized with this stylish and practical Oil Service tag ! Designed in the shape of a motor oil container , this tag hangs easily in your vehicle and reminds you when your next oil change is due. Printing: height…
Files are hosted by the publisher — 3DX does not serve them directly. The link opens the model page in a new tab.
About this model
Keep your car maintenance organized with this stylish and practical Oil Service tag! Designed in the shape of a motor oil container, this tag hangs easily in your vehicle and reminds you when your next oil change is due.
Printing:
height layer: 0,16mm, on 20 layer change colour from white to red.
✅ Features:
- Bold “OIL SERVICE / NEXT SERVICE DUE” text
- Three labeled fields to write in:
- Date
- Mileage
- Oil Type
- Clean, easy-to-read layout
- Eye-catching fuel can shape with built-in hanging hole
🖨️ Print Info:
- Print flat on the bed – no supports needed
- Designed for single or dual-color printing
- Perfect for PLA or PETG
- Optional: paint or use a permanent marker to fill in the text and fields
🎯 Use Cases:
- Hang it from your rearview mirror, under the hood, or in your garage
- Ideal for mechanics, fleet managers, or just keeping track of your personal car’s maintenance
- Great as a gift for car lovers
Print settings
These are the settings the model was actually printed and tested with — the profile in the 3MF is already set up this way, so you can send it straight to the printer.
- Layer height: 0.16 mm
- Nozzle: 0.4 mm
- Walls: 2
- Infill: 15 %
- Filament: ~12 g
Files
The model is free on MakerWorld and ships as a ready-to-print 3MF with the print profile inside — no slicer setup needed. Hit the download button above; the file is hosted there, not on 3DX.
Frequently asked questions
Can I print this tag with a single-color printer, or do I need an AMS?
You can print it with a single-color printer. The article mentions it is designed for single or dual-color printing, and the color change from white to red happens at layer 20 by pausing the print to swap filament manually. No AMS or multi-material unit is required.
Will the tag survive under the hood of my car if I use PLA?
PLA may soften or deform in a hot engine bay, especially during summer. The article recommends PLA or PETG, so if you plan to hang the tag under the hood, switch to PETG for better heat resistance. For hanging on a rearview mirror or in a garage, PLA is fine.
How do I fill in the date, mileage, and oil type fields on the printed tag?
The article says you can use a permanent marker or paint to fill in the text and fields after printing. The tag prints with recessed areas for those three labeled fields, so a standard permanent marker or acrylic paint pen works well to make the writing legible.
