Lakota Symbol Keychain – Simple Form, Deep Meaning
This keychain features a classic four-quadrant symbol commonly found in Lakota culture, rendered in the traditional colors: black, white, red, and yellow. The circle divided into equal parts represents balance, the four directions, the…
Files are hosted by the publisher — 3DX does not serve them directly. The link opens the model page in a new tab.
About this model
This keychain features a classic four-quadrant symbol commonly found in Lakota culture, rendered in the traditional colors: black, white, red, and yellow. The circle divided into equal parts represents balance, the four directions, the seasons, and the interconnectedness of life and spirit.
Features:
- Lakota-inspired design – a clean, circular emblem split into four equal sections, each in one of the sacred colors.
- Cultural meaning – the traditional “Medicine Wheel” represents harmony, the cycle of life, and unity of body, mind, spirit, and emotions.
- Multicolor 3D print (AMS required) – designed for multicolor printing using AMS or similar multi-material systems for clean color separation.
- Lightweight and compact – ideal as a keychain, bag charm, or meaningful token to carry with you.
- Material – printed in PLA or similar filament; best displayed in symbolic tones for full visual and cultural impact.
A unique piece for those who appreciate symbolism, Indigenous cultures, and minimalistic, meaningful design.
Print settings
These are the settings the model was actually printed and tested with — the profile in the 3MF is already set up this way, so you can send it straight to the printer.
- Layer height: 0.16 mm
- Nozzle: 0.4 mm
- Walls: 2
- Infill: 15 %
- Filament: ~55 g
Files
The model is free on MakerWorld and ships as a ready-to-print 3MF with the print profile inside — no slicer setup needed. Hit the download button above; the file is hosted there, not on 3DX.
Frequently asked questions
Do I need an AMS to print this keychain, or can I do a filament swap manually?
The article states the design is made for multicolor printing and requires an AMS or similar multi-material system for clean color separation. A manual filament swap at a single layer height would not produce the four separate color quadrants this model is designed for, so an AMS is effectively required.
What is the total print time for this keychain at the recommended settings?
The article does not list a specific print time. However, at 0.16 mm layer height with a 0.4 mm nozzle, 15% infill, and roughly 55 g of filament, a small keychain of this type typically prints in 2 to 4 hours, depending on your printer’s speed and acceleration settings.
Can I print this with a single color of filament and paint the quadrants afterward?
Yes. While the model is designed for multicolor AMS printing, nothing prevents you from printing it in a single color (such as white or black) and hand-painting the four quadrants with acrylic paints. Just note the article emphasizes the visual and cultural impact of the traditional colors, so painting is a valid alternative if you lack an AMS.
