Keychain Renault
A keychain featuring the Renault logo is both an aesthetic and functional accessory, perfect for brand enthusiasts and Renault owners alike. The design showcases a modern, geometric take on the iconic diamond, set into a layered,…
Files are hosted by the publisher — 3DX does not serve them directly. The link opens the model page in a new tab.
About this model
A keychain featuring the Renault logo is both an aesthetic and functional accessory, perfect for brand enthusiasts and Renault owners alike. The design showcases a modern, geometric take on the iconic diamond, set into a layered, three‑dimensional structure for a striking, dimensional look.
Features:
- Dimensions: Compact and lightweight—ideal for everyday use on your keyring.
- Layers:
- Logo: The stylized diamond in a deep black serves as the primary focal point.
- Border: A thick white outline adds depth and sharpens the silhouette.
- Attachment: A built‑in hole at the top lets you easily clip on a split ring or carabiner, so you can secure it to your keys or a lanyard in seconds.
Print settings
These are the settings the model was actually printed and tested with — the profile in the 3MF is already set up this way, so you can send it straight to the printer.
- Layer height: 0.2 mm
- Nozzle: 0.4 mm
- Walls: 2
- Infill: 15 %
- Filament: ~8 g
Files
The model is free on MakerWorld and ships as a ready-to-print 3MF with the print profile inside — no slicer setup needed. Hit the download button above; the file is hosted there, not on 3DX.
Frequently asked questions
Do I need to do a filament change manually for the two colors?
No. The 3MF file includes a ready-to-print profile with the color changes already set for the black logo and white border layers. Just load black and white filament, send the file to your printer, and it will pause automatically at the correct layer for the swap.
Can I print this on a single-color printer?
Yes, but the two-tone effect will be lost. The model will print as a solid object in whatever single color you load. For the intended layered look with a black logo and white border, you need either a printer with an MMU or the ability to pause and swap filament at the layer height specified in the profile.
How do I attach it to my keys after printing?
The model has a built-in hole at the top designed to fit a standard split ring or small carabiner. After printing, simply open a split ring, thread it through the hole, and close it onto your keyring or lanyard — no additional hardware or post-processing is required.
