Keychain Ford Mondeo
A Ford Mondeo logo keychain is a stylish and practical accessory, perfect for Ford enthusiasts and car owners. Its modern design highlights the iconic emblem, which gains a three-dimensional effect thanks to its layered construction.…
Files are hosted by the publisher — 3DX does not serve them directly. The link opens the model page in a new tab.
About this model
A Ford Mondeo logo keychain is a stylish and practical accessory, perfect for Ford enthusiasts and car owners. Its modern design highlights the iconic emblem, which gains a three-dimensional effect thanks to its layered construction.
Features:
- Compact size – ideal for attaching to keys.
- Double-sided design – ensures the logo is visible from both sides.
- Layered structure:
- Logo – the central element featuring the classic Ford Mondeo emblem.
- Border – a white outline that enhances depth and highlights the emblem’s shape.
- Additional elements – a hole for easy attachment to a keyring or lanyard.
- Assembly required – the keychain consists of two separate pieces that need to be glued together after printing.
A perfect gadget for Ford Mondeo fans, combining aesthetics with functionality!
Print settings
These are the settings the model was actually printed and tested with — the profile in the 3MF is already set up this way, so you can send it straight to the printer.
- Layer height: 0.16 mm
- Nozzle: 0.4 mm
- Walls: 2
- Infill: 15 %
- Filament: ~11 g
Files
The model is free on MakerWorld and ships as a ready-to-print 3MF with the print profile inside — no slicer setup needed. Hit the download button above; the file is hosted there, not on 3DX.
Frequently asked questions
Can I print this with a single-color printer, or does the layered design require an AMS or filament swap?
The model uses a layered construction with separate pieces that are glued together after printing, so you can print each piece in a different color on a single extruder printer without any filament swaps. The 3MF profile is set up for a 0.4 mm nozzle and 0.16 mm layer height, but you will need to assign the correct filament color to each part in your slicer before printing.
What type of glue works best for assembling the two pieces?
Any standard cyanoacrylate (super glue) or epoxy adhesive works well for joining the two printed parts, as the flat mating surfaces provide good contact area. For best results, lightly sand the bonding surfaces with fine-grit sandpaper before gluing to improve adhesion.
Does the keychain come with a metal keyring or lanyard included in the download?
No, the download only contains the 3D printable 3MF file for the two plastic pieces—the hole for attachment is modeled into the design, but you need to supply your own keyring, split ring, or lanyard separately.
